This is a large scale system, capable of filling up overhead tanks with harvested water. Care should be taken that the harvested water doesn’t have leaves or paper or plastic, as it may clog your pump or filter. This can be achieved by putting in barbed wires or nets at the terrace mouth of rainwater pipes, or by fixing large net bags at the input of the tank, to catch large objects like leaves.

The first level acts as a catcher to the system, which captures rough grains, small seeds, escaped bits of leaves and twigs etc. It is a Bag Filter containing activated charcoal.

The second level fully polishes the water at micron level, taking out fine sand particles, dirt and dust, making the water crystal clear and ready to use.

Thereafter, fix a 0.5 HP or 1 HP monoblock pump before the filter with help of a plumber, and you can directly use the water that comes out of the filter. Please note that pump, input tank, or plumbing work is not included in our package. You will need to arrange the same with a local plumber.

The bag filter should be washed once in a month.

An extra bag is to be provided with the product to change the bag when it will be damaged.

Please note that the output water is fit for all purposes except human consumption. You can always consume it, after you have filtered it through your home drinking water purifier. Thus, you can direct the output water to your overhead tank, or just run the pump and collect the water whenever you need.

Technical Specifications:

Dimension : 20" x 10" x 26"

Input/Output : 1.5"